Prováděcí nařízení Komise (EU) 2020/683 ze dne 15. dubna 2020, kterým se provádí nařízení Evropského parlamentu a Rady (EU) 2018/858, pokud jde o správní požadavky na schvalování motorových vozidel a jejich přípojných vozidel, jakož i systémů, konstrukčních částí a samostatných technických celků určených pro tato vozidla, a na dozor nad trhem s nimi

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/ECOJ L 151, 14.6.2018, p. 1 . , and in particular Articles 24(4), 28(3), 30(3), 36(4), 38(3), 41(4), 42(5), 44(5) and 45(7) thereof,

The template laid down in Annex I to this Regulation shall be used for the information document referred to in Article 24(1)(a) of Regulation (EU) 2018/858 for the purposes of the following EU type-approvals:

(a) the whole-vehicle single-step type-approval;

(b) the whole-vehicle mixed type-approval;

(c) the whole-vehicle multi-stage type-approval;

(d) the type-approval of systems, components or separate technical units.

The template laid down in Annex II to this Regulation shall be used for the information document referred to in Article 24(1)(a) of Regulation (EU) 2018/858 for the purposes of the EU whole-vehicle step-by-step type-approval.

OJ L 151, 14.6.2018, p. 1 .

(1) In the interest of clarity, predictability and simplification of the documents used for type-approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles these documents should be standardised to reduce the burden on vehicle manufacturers, based on existing practice.

(2) In order to increase transparency and to ensure that the required type-approval information is consistently presented, the templates for type-approval certificates should be laid down.

(3) In order to ensure a harmonised presentation of the document issued by manufacturers to certify that a produced vehicle conforms to the approved type, templates for certificates of conformity should be established. In the interests of clarity, the date of manufacture of the vehicle should be added to the certificate of conformity.

(4) In order to clearly identify the legal acts that apply to the vehicles, systems, components or separate technical units a harmonised numbering system for type-approval certificates should be established.

(5) The presentation of the most relevant information in the test reports should be harmonised. It is therefore necessary to establish a minimum set of requirements for the format of the test reports.

(6) In order to better identify the results of the tests carried out on the approved vehicle type, a harmonised test result sheet containing a minimum set of information, should be established.

(7) In order to allow manufacturers to receive a type-approval or to place on the market new vehicles in accordance with the third paragraph of Article 91 of Regulation (EU) 2018/858, this Regulation should be applicable as of 5 July 2020 .

(8) The empowerments contained in Articles 24(4), 28(3), 30(3), 36(4), 38(3), 41(4), 42(5), 44(5) and 45(7) of Regulation (EU) 2018/858 aim at the introduction of harmonised templates, models and formats necessary for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, and for placing them on the market. As those empowerments are closely linked by their subject matter, they should be bundled in this Regulation.

(9) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee – Motor Vehicles (TCMV) referred to in Article 83 of Regulation (EU) 2018/858,

Model A of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858, where that certificate concerns an EU whole-vehicle type-approval, and for the type-approval certificate referred to in Article 41(3) of Regulation (EU) 2018/858.

Model B of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858 where that certificate concerns an EU system type-approval.

Model C of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858 where that certificate concerns an EU component type-approval or an EU separate technical unit type-approval.

Model D of Annex III to this Regulation shall be used for the EU individual vehicle approval certificate referred to in Article 44(4) of Regulation (EU) 2018/858.

Article 1 Article 1 Templates for the information document 1.The template laid down in Annex I to this Regulation shall be used for the information document referred to in Article 24(1)(a) of Regulation (EU) 2018/858 for the purposes of the following EU type-approvals: (a) the whole-vehicle single-step type-approval;(b) the whole-vehicle mixed type-approval;(c) the whole-vehicle multi-stage type-approval;(d) the type-approval of systems, components or separate technical units. 2.The template laid down in Annex II to this Regulation shall be used for the information document referred to in Article 24(1)(a) of Regulation (EU) 2018/858 for the purposes of the EU whole-vehicle step-by-step type-approval.

Article 2 Article 2 Templates for EU type-approval certificates, including EU type-approval certificates for vehicles produced in small series, and EU individual vehicle approval certificates 1.Model A of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858, where that certificate concerns an EU whole-vehicle type-approval, and for the type-approval certificate referred to in Article 41(3) of Regulation (EU) 2018/858. 2.Model B of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858 where that certificate concerns an EU system type-approval. 3.Model C of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 28(1) of Regulation (EU) 2018/858 where that certificate concerns an EU component type-approval or an EU separate technical unit type-approval. 4.Model D of Annex III to this Regulation shall be used for the EU individual vehicle approval certificate referred to in Article 44(4) of Regulation (EU) 2018/858.

Article 3 Article 3 Templates for national type-approval certificates for vehicles produced in small series and national individual vehicle approval certificates 1.Model A of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 42(4) of Regulation (EU) 2018/858. 2.Model E of Annex III to this Regulation shall be used for the national individual vehicle approval certificate referred to in Article 45(5) of Regulation (EU) 2018/858.

Article 4 Article 4 Numbering system for approval certificates

Article 5 Article 5 Model for the EU type-approval mark for components and separate technical units

Article 6 Article 6 Template for the test results sheet

Article 7 Article 7 Format of test reports

Article 8 Article 8 Templates and other requirements for certificates of conformity

Article 9 Article 9 Entry into force and application

Model A of Annex III to this Regulation shall be used for the type-approval certificate referred to in Article 42(4) of Regulation (EU) 2018/858.

Model E of Annex III to this Regulation shall be used for the national individual vehicle approval certificate referred to in Article 45(5) of Regulation (EU) 2018/858.

The approval certificates referred to in Articles 28(2), 41(3), 42(4), 44(4) and 45(6) of Regulation (EU) 2018/858 shall be numbered in accordance with the method set out in Annex IV to this Regulation.

The model laid down in Annex V to this Regulation shall be used for the EU type-approval mark for components and separate technical units referred to in Article 38(2) of Regulation (EU) 2018/858.

The template laid down in Annex VI to this Regulation shall be used for the test results sheet referred to in Article 28(1)(b) of Regulation (EU) 2018/858.

The test reports referred to in Article 30(2) of Regulation (EU) 2018/858 shall be laid down in accordance with the provisions on the format of test reports set out in Annex VII to this Regulation.

The templates and requirements laid down in Annex VIII to this Regulation shall be used for the paper format of the certificate of conformity referred to in Article 36(1) of Regulation (EU) 2018/858.

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

It shall apply from 5 July 2020 .

HAS ADOPTED THIS REGULATION: